New Building Connects
Service Processing Charge: $15
Service Fee
Closest corner from lot feed point and meter located within first 15 feet on structure: $565
Distance Fee Adder
Other than closest corner: $290
Designed Jobs
Service Processing Charge: $15
Service Fee
Closest corner from lot feed point and meter located within first 15 feet on structure: $1,140
Cable Fee
0 to 200 feet from lot feed point: $0 per foot
Excess over 200 up to 850 feet: $9.40 per foot
Excess over 850 up to 1500 feet: $5.90 per foot
Excess over 1501 feet: $3.90 per foot
Distance Fee Adder
Other than closest corner: $290
Additional Cable Run: $215
Designed Jobs – No Lot Feed Point
Service Processing Charge: $15
Service Fee: $2,505
Cable Fee
0 to 200 feet from lot feed point: $0 per foot
Excess over 200 up to 850 feet: $9.40 per foot
Excess over 850 up to 1500 feet: $5.90 per foot
Excess over 1501 feet: $3.90 per foot
Service Processing Charge: $15
Service Fee: $2,845
Cable Fee
0 to 200 feet from connection point: $0 per foot
Excess over 200 feet: $13.15 per foot
Excess over 850 feet: $10.00 per foot
Connection Cabinet Cable Fee (per run): $275
Additional Cable Run: $315
System Capacity Fee: 60 percent of transformer costs
Note: Above cost may vary depending on analysis of cost and revenue.
The Connexus Energy winter construction charge policy is effective from November 1 through April 1. To avoid these charges, work requests must meet all of Connexus Energy's local and state requirements prior to November 1. The following charges (in addition to standard charges) will apply:
Single-Phase Services
New Building Connects: $265
Designed Jobs - Lot Feed Point: $550
0 to 200 feet from connection point: $0 per foot
Excess footage over 200 feet: $5.00 per foot
Designed Jobs - No Lot Feed Point: $880
0 to 200 feet from connection point: $0 per foot
Excess footage over 200 feet: $5.00 per foot
Three-Phase Services
All Footage: $6.00 per foot
Service Changes and Non-Standard Loads: $5.00 per foot
Review the full Schedule of Charges. For additional information, please contact Member Services at 763.323.2650.
Generators, disconnects & transfer switches must be inspected.